+44 (0)1825 890010
The UK's largest dedicated lure fishing website
SURECATCH LUMO SLEEVE
Lumo rig tubing/sleeve. in 3mm & 4mm & four colours.
So what is the point of "lumo rig tubing I hear you ask ?
Well it has hundreds of uses, first it can be used for rig enhancement:- (see pictures below)
A small piece can be added to the trebles on your lures to add attraction at dusk & dawn.
Likewise above your worm / fish bait on the trace, where it not only attracts, but also protects the trace from wear (as per the diagram on the pack).
It can form the body of a fly or a spinner, we use it in our range of bucktails & many of our other lures & flies.
It can be used on the shank of a hook during daylight for mackerel & at night for scad & squid.
It is used in 10" to 15" lengths with wire & two trebles to catch Barracuda & the list goes on !!
When fishing abroad I always carry a couple of rolls in my bag for who knows what ??
Sovereign Rattles: ..A very useful addition to almost any lure, made of high impact plastic and sharp at one end so they can be pushed into soft plastics with ease, necked in towards the back end so that they can be attached to spinner baits with the use of a float band, usually on the frame wire just beneath the blades. For those of you who make your own lures, these are easy to insert during manufacture and they are very reasonably priced.
Flying "C" bodies: These come in four colours & three sizes, they are silicon & will expand to almost double their diameter to fit over the weight.
Like the rest of the components in our range, these bodies are NOT from China, these Flying "C" bodies are made in ENGLAND.
They are packed in dozens of one colour or a try pack of all four.
Sizes :- 7mm X 80mm, 5mm X 50mm, 3mm X 30mm.
Uses:- Apart from the obvious, they can be cut shorter & used to give flash / attraction to the hook of any lure.
They can be used as bodies for predator flies.
They can also be doubled up to create multi-coloured Flying Cs, used on your line above bait for extra attraction & the list goes on !
Blade Bulbs: Blade Bulbs to make your own topwater lures:- We have a surplus of these six stock colours & have decided to make them available to DIY lure makers to create your own lures.
The Bulb itself is 3-1/4" in length, the blade adds another 3/8th" to the length & protrudes 1 5/8th", the blade itself is made of 18 gauge (aprox1.2mm) Aluminium.
These are hand made in the US exclusively for Sovereign Superbaits, they weigh 31g-33g 1-1/4oz & are made from Poplar.
They have two coats of primer, two coats of colour, top pattern colour & two coats of "epoxy clear" to make them shine. Most of the clear coats have extra fine glitter in to add a sparkle.
PREDATOR FISHING SPECIALIST
Lure fishing for Pike, Bass, Zander & Perch Fly fishing for Pike, Bass, Zander, Perch & Carp